Dataset for fracture and impact toughness of high-entropy alloys

References

Journal reference
Zhang, H., He, Y. & Pan, Y. Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0.5 high-entropy alloy by martensite strengthening. Scr. Mater. 69, 342-345 (2013), doi: 10.1016/j.scriptamat.2013.05.020

Journal reference
Roy, U., Roy, H., Daoud, H., Glatzel, U. & Ray, K. K. Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloy system. Mater. Lett. 132, 186-189 (2014), doi: 10.1016/j.matlet.2014.06.067

Journal reference
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P. & Ritchie, R. O. A fracture-resistant high-entropy alloy for cryogenic applications. Science 345, 1153-1158 (2014), doi: 10.1126/science.1254581

Journal reference
Seifi, M., Li, D., Yong, Z., Liaw, P. K. & Lewandowski, J. J. Fracture toughness and fatigue crack growth behavior of as-cast high-entropy alloys. Jom 67, 2288-2295 (2015), doi: 10.1007/s11837-015-1563-9

Journal reference
Chen, C., Pang, S., Cheng, Y. & Zhang, T. Microstructure and mechanical properties of Al20−xCr20+0.5xFe20Co20Ni20+0.5x high entropy alloys. J. Alloys Compd. 659, 279-287 (2016), doi: 10.1016/j.jallcom.2015.10.258

Journal reference
Gludovatz, B., Hohenwarter, A., Thurston, K. V., Bei, H., Wu, Z., George, E. P. & Ritchie, R. O. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures. Nat. Commun. 7, 10602 (2016), doi: 10.1038/ncomms10602

Journal reference
Zhang, A., Han, J., Meng, J., Su, B. & Li, P. Rapid preparation of AlCoCrFeNi high entropy alloy by spark plasma sintering from elemental powder mixture. Mater. Lett. 181, 82-85 (2016), doi: 10.1016/j.matlet.2016.06.014

Journal reference
Zou, Y., Okle, P., Yu, H., Sumigawa, T., Kitamura, T., Maiti, S., Steurer, W. & Spolenak, R. Fracture properties of a refractory high-entropy alloy: In situ micro-cantilever and atom probe tomography studies. Scr. Mater. 128, 95-99 (2017), doi: 10.1016/j.scriptamat.2016.09.036

Journal reference
Zhang, A., Han, J., Su, B., Li, P. & Meng, J. Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite. Mater. Design 114, 253-263 (2017), doi: 10.1016/j.matdes.2016.11.072

Journal reference
Mohanty, S., Maity, T. N., Mukhopadhyay, S., Sarkar, S., Gurao, N. P., Bhowmick, S. & Biswas, K. Powder metallurgical processing of equiatomic AlCoCrFeNi high entropy alloy: Microstructure and mechanical properties. Mater. Sci. Eng.: A 679, 299-313 (2017), doi: 10.1016/j.msea.2016.09.062

Journal reference
Luo, W., Liu, Y., Luo, Y. & Wu, M. Fabrication and characterization of WC-AlCoCrCuFeNi high-entropy alloy composites by spark plasma sintering. J. Alloys Compd. 754, 163-170 (2018), doi: 10.1016/j.jallcom.2018.04.270

Journal reference
Yadav, S., Sarkar, S., Aggarwal, A., Kumar, A. & Biswas, K. Wear and mechanical properties of novel (CuCrFeTiZn)100-xPbx high entropy alloy composite via mechanical alloying and spark plasma sintering. Wear 410-411, 93-109 (2018), doi: 10.1016/j.wear.2018.05.023

Journal reference
Zhang, A., Han, J., Su, B. & Meng, J. A promising new high temperature self-lubricating material: CoCrFeNiS0.5 high entropy alloy. Mater. Sci. Eng.: A 731, 36-43 (2018), doi: 10.1016/j.msea.2018.06.030

Journal reference
Wang, S.-P., Ma, E. & Xu, J. Notch fracture toughness of body-centered-cubic (TiZrNbTa) Mo high-entropy alloys. Intermetallics 103, 78-87 (2018), doi: 10.1016/j.intermet.2018.10.008

Journal reference
Chen, L., Bobzin, K., Zhou, Z., Zhao, L., Öte, M., Königstein, T., Tan, Z. & He, D. Wear behavior of HVOF-sprayed Al0.6TiCrFeCoNi high entropy alloy coatings at different temperatures. Surf. Coat. Technol. 358, 215-222 (2019), doi: 10.1016/j.surfcoat.2018.11.052

Journal reference
Jo, Y. H., Choi, W. M., Kim, D. G., Zargaran, A., Lee, K., Sung, H., Sohn, S. S., Kim, H. S., Lee, B. J. & Lee, S. Utilization of brittle σ phase for strengthening and strain hardening in ductile VCrFeNi high-entropy alloy. Mater. Sci. Eng.: A 743, 665-674 (2019), doi: 10.1016/j.msea.2018.11.136

Journal reference
Chung, D., Ding, Z. & Yang, Y. Hierarchical Eutectic Structure Enabling Superior Fracture Toughness and Superb Strength in CoCrFeNiNb0.5 Eutectic High Entropy Alloy at Room Temperature. Adv. Eng. Mater. 21 (2018), doi: 10.1002/adem.201801060

Journal reference
Xiao, Y., Zou, Y., Ma, H., Sologubenko, A. S., Maeder, X., Spolenak, R. & Wheeler, J. M. Nanostructured NbMoTaW high entropy alloy thin films: High strength and enhanced fracture toughness. Scr. Mater. 168, 51-55 (2019), doi: 10.1016/j.scriptamat.2019.04.011

Journal reference
Jo, Y. H., Doh, K.-Y., Kim, D. G., Lee, K., Kim, D. W., Sung, H., Sohn, S. S., Lee, D., Kim, H. S., Lee, B.-J. & Lee, S. Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy. J. Alloys Compd. 809 (2019), doi: 10.1016/j.jallcom.2019.151864

Journal reference
Nair, R. B., Arora, H. S., Boyana, A. V., Saiteja, P. & Grewal, H. S. Tribological behavior of microwave synthesized high entropy alloy claddings. Wear 436-437 (2019), doi: 10.1016/j.wear.2019.203028

Journal reference
Wang, Z., Xiong, J., Guo, Z., Yang, T., Liu, J. & Chai, B. The microstructure and properties of novel Ti(C,N)-based cermets with multi-component CoCrFeNiCu high-entropy alloy binders. Mater. Sci. Eng.: A 766 (2019), doi: 10.1016/j.msea.2019.138345

Journal reference
Fang, Y., Chen, N., Du, G., Zhang, M., Zhao, X., Cheng, H. & Wu, J. High-temperature oxidation resistance, mechanical and wear resistance properties of Ti(C,N)-based cermets with Al0.3CoCrFeNi high-entropy alloy as a metal binder. J. Alloys Compd. 815 (2020), doi: 10.1016/j.jallcom.2019.152486

Journal reference
Li, N., Wu, S., Ouyang, D., Zhang, J. & Liu, L. Fe-based metallic glass reinforced FeCoCrNiMn high entropy alloy through selective laser melting. J. Alloys Compd. 822 (2020), doi: 10.1016/j.jallcom.2020.153695

Journal reference
Ganji, R. S., Rajulapati, K. V. & Rao, K. Development of a multi-phase AlCuTaVW high-entropy alloy using powder metallurgy route and its mechanical properties. Trans. Indian Inst. Met. 73, 613-618 (2020), doi: 10.1007/s12666-020-01875-2

Journal reference
Xin, B., Zhang, A., Han, J., Su, B. & Meng, J. Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites. J. Alloys Compd. 836 (2020), doi: 10.1016/j.jallcom.2020.155273

Journal reference
Guo, Z., Zhang, A., Han, J. & Meng, J. Microstructure, mechanical and tribological properties of CoCrFeNiMn high entropy alloy matrix composites with addition of Cr3C2. Tribology International 151 (2020), doi: 10.1016/j.triboint.2020.106436

Journal reference
Jo, Y. H., Yang, J., Doh, K.-Y., An, W., Kim, D. W., Sung, H., Lee, D., Kim, H. S., Sohn, S. S. & Lee, S. Analysis of damage-tolerance of TRIP-assisted V10Cr10Fe45Co30Ni5 high-entropy alloy at room and cryogenic temperatures. J. Alloys Compd. 844 (2020), doi: 10.1016/j.jallcom.2020.156090

Journal reference
Long, Y., Che, J., Wu, Z., Lin, H.-T. & Zhang, F. High entropy alloy borides prepared by powder metallurgy process and the enhanced fracture toughness by addition of yttrium. Mater. Chem. Phys. 257 (2021), doi: 10.1016/j.matchemphys.2020.123715

Journal reference
Gou, Q., Xiong, J., Guo, Z., Liu, J., Yang, L. & Li, X. Influence of NbC additions on microstructure and wear resistance of Ti(C,N)-based cermets bonded by CoCrFeNi high-entropy alloy. International Journal of Refractory Metals and Hard Materials 94 (2021), doi: 10.1016/j.ijrmhm.2020.105375

Journal reference
Erdogan, A., Günen, A., Gök, M. S. & Zeytin, S. Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy. Vacuum 183 (2021), doi: 10.1016/j.vacuum.2020.109820

Journal reference
Scales, R. J., Armstrong, D. E. J., Wilkinson, A. J. & Li, B. S. On the brittle-to-ductile transition of the as-cast TiVNbTa refractory high-entropy alloy. Materialia 14 (2020), doi: 10.1016/j.mtla.2020.100940

Journal reference
Salemi, F., Karimzadeh, F. & Abbasi, M. H. Evaluation of Thermal and Mechanical Behavior of CuNiCoZnAl High-Entropy Alloy Fabricated Using Mechanical Alloying and Spark Plasma Sintering. Met. Mat. Trans. A 52, 1947-1962 (2021), doi: 10.1007/s11661-021-06205-9

Journal reference
Dada, M., Popoola, P., Mathe, N., Adeosun, S. & Pityana, S. Investigating the elastic modulus and hardness properties of a high entropy alloy coating using nanoindentation. International Journal of Lightweight Materials and Manufacture 4, 339-345 (2021), doi: 10.1016/j.ijlmm.2021.04.002

Journal reference
Liu, Q., Dong, T.-s., Fu, B.-g., Li, G.-l. & Yang, L.-j. Effect of Laser Remelting on Microstructure and Properties of AlCoCrFeNi High-Entropy Alloy Coating. J. Mater. Eng. Perform. 30, 5728-5735 (2021), doi: 10.1007/s11665-021-05806-0

Journal reference
Günen, A. Tribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy. Surf. Coat. Technol. 421 (2021), doi: 10.1016/j.surfcoat.2021.127426

Journal reference
Górniewicz1a, D., Jóźwiak, S., Przygucki, H. & Kopec, M. The concept of improving the fracture toughness of double-phase high entropy alloy produced by high-pulse sintering method U-FAST. 15th International Conference on Advances in Experimental Mechanics (2021)

Journal reference
Solodkyi, I., Teslia, S., Bezdorozhev, O., Trosnikova, I., Yurkova, O., Bogomol, I. & Loboda, P. Hardmetals prepared from WC-W2C eutectic particles and AlCrFeCoNiV high entropy alloy as a binder. Vacuum 195 (2022), doi: 10.1016/j.vacuum.2021.110630

Journal reference
Xin, B., Zhang, A., Han, J., Zhang, J. & Meng, J. Enhancing mechanical properties of the boron doped Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy via tuning composition and microstructure. J. Alloys Compd. 896 (2022), doi: 10.1016/j.jallcom.2021.162852

Journal reference
Yang, J., Jo, Y. H., An, W., Kim, H. S., Lee, B.-J., Lee, S., Sung, H. & Sohn, S. S. Effects of deformation-induced martensitic transformation on cryogenic fracture toughness for metastable Si8V2Fe45Cr10Mn5Co30 high-entropy alloy. Acta Mater. 225 (2022), doi: 10.1016/j.actamat.2021.117568

Journal reference
Jiang, H., Ni, Z., Wang, J., Li, L., Huang, T., Han, K., Zhang, Q. & Sui, H. Design multi‐component eutectic alloys in the Co‐Cr‐Fe‐Ni‐Nb system using simple mixing method. Adv. Eng. Mater. 24, 202101339 (2022), doi: 10.1002/adem.202101339

Journal reference
Hong, S., Li, J., Zhao, P., Xu, Y. & Li, W. Evolution in Wear and High-Temperature Oxidation Resistance of Laser-Clad AlxMoNbTa Refractory High-Entropy Alloys Coatings with Al Addition Content. Coatings 12 (2022), doi: 10.3390/coatings12020121

Journal reference
Yang, S., Xiong, J., Guo, Z., Wu, B., Yang, T. e., You, Q., Liu, J., Deng, C., Fang, D., Gou, S., Yu, Z. & Chen, S. Effects of CrMnFeCoNi additions on microstructure, mechanical properties and wear resistance of Ti(C,N)-based cermets. Journal of Materials Research and Technology 17, 2480-2494 (2022), doi: 10.1016/j.jmrt.2022.02.021

Journal reference
Fan, X. J., Qu, R. T. & Zhang, Z. F. Remarkably high fracture toughness of HfNbTaTiZr refractory high-entropy alloy. Journal of Materials Science & Technology 123, 70-77 (2022), doi: 10.1016/j.jmst.2022.01.017

Journal reference
Wu, Z., Chen, Y., Hai, W. & Liu, M. Effect of AlxCoCrFeNiCu binder on mechanical properties and wear performance of Ti (C, N) cermet. International Journal of Modern Physics B 36, 2240038 (2022), doi: 10.1142/S0217979222400380

Journal reference
Qian, C., Liu, Y., Cheng, H., Li, K., Liu, B. & Zhang, X. Effect of carbon content on microstructure and mechanical properties of cemented carbides with CoNiFeCr high entropy alloy binder. Available at SSRN 4074390 (2022), doi: 10.2139/ssrn.4074390

Journal reference
Long, Y., Zhang, G., Chen, J., Datye, A., Zhang, S., Schwarz, U. D., Lin, H.-T. & Zhang, F. Effect of Yttrium on Mechanical Properties, Phases, and Microstructure of Feconialcrb High Entropy Alloys Prepared by Sps. Available at SSRN 4074390 (2022), doi: 10.2139/ssrn.4084629

Journal reference
Liu, L.-X., Pan, J., Zhang, C., Xu, J.-Y., Guo, R. & Liu, L. Achieving high strength and ductility in a 3D-printed high entropy alloy by cooperative planar slipping and stacking fault. Mater. Sci. Eng.: A 843 (2022), doi: 10.1016/j.msea.2022.143106

Journal reference
Zheng, D. High-Entropy-Alloy CoFeNiCr Bonded WC-Based Cemented Carbide Prepared by Spark Plasma Sintering. Met. Mat. Trans. A 53, 2724-2729 (2022), doi: 10.1007/s11661-022-06701-6

Journal reference
Semenyuk, A., Klimova, M., Shaysultanov, D., Chernichenko, R., Zherebtsov, S. & Stepanov, N. Effect of carbon content on cryogenic mechanical properties of CoCrFeMnNi high entropy alloy. IOP Conference Series: Materials Science and Engineering. 012050 (2021)

Journal reference
Jiang, W., Gao, X., Cao, Y., Liu, Y., Mao, Q., Gu, L. & Zhao, Y. Charpy impact behavior and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at ambient and cryogenic temperatures. Mater. Sci. Eng.: A 837 (2022), doi: 10.1016/j.msea.2022.142735

Journal reference
Li, D. & Zhang, Y. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures. Intermetallics 70, 24-28 (2016), doi: 10.1016/j.intermet.2015.11.002

Journal reference
Xia, S. Q., Gao, M. C. & Zhang, Y. Abnormal temperature dependence of impact toughness in Al CoCrFeNi system high entropy alloys. Mater. Chem. Phys. 210, 213-221 (2018), doi: 10.1016/j.matchemphys.2017.06.021

Journal reference
Kim, J. H., Lim, K. R., Won, J. W., Na, Y. S. & Kim, H.-S. Mechanical properties and deformation twinning behavior of as-cast CoCrFeMnNi high-entropy alloy at low and high temperatures. Mater. Sci. Eng.: A 712, 108-113 (2018), doi: 10.1016/j.msea.2017.11.081

Journal reference
Bi, G., Chew, Y., Weng, F., Zhu, Z., Ng, F. L. & Lee, B. Y. Process study and characterization of properties of FerCrNiMnCo high-entropy alloys fabricated by laser-aided additive manufacturing. Advanced Laser Processing and Manufacturing II. 43-52 (2018), doi: 10.1117/12.2502272

Journal reference
Jo, Y. H., Kim, D. G., Jo, M. C., Doh, K. Y., Sohn, S. S., Lee, D., Kim, H. S., Lee, B. J. & Lee, S. Effects of deformation–induced BCC martensitic transformation and twinning on impact toughness and dynamic tensile response in metastable VCrFeCoNi high–entropy alloy. J. Alloys Compd. 785, 1056-1067 (2019), doi: 10.1016/j.jallcom.2019.01.293

Journal reference
Yang, M., Zhou, L., Wang, C., Jiang, P., Yuan, F., Ma, E. & Wu, X. High impact toughness of CrCoNi medium-entropy alloy at liquid-helium temperature. Scr. Mater. 172, 66-71 (2019), doi: 10.1016/j.scriptamat.2019.07.010

Journal reference
Lin, D., Xu, L., Jing, H., Han, Y., Zhao, L. & Minami, F. Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated via selective laser melting. Add. Manuf. 32 (2020), doi: 10.1016/j.addma.2020.101058

Journal reference
Zhang, L. & Zhang, Y. Tensile Properties and Impact Toughness of AlCoxCrFeNi3.1–x (x = 0.4, 1) High-Entropy Alloys. Frontiers in Materials 7 (2020), doi: 10.3389/fmats.2020.00092

Journal reference
Kim, Y.-K., Kim, M.-C. & Lee, K.-A. 1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion. Journal of Materials Science & Technology 97, 10-19 (2022), doi: 10.1016/j.jmst.2021.04.030

Journal reference
Ostovari Moghaddam, A., Pasandideh, J., Abdollahzadeh, A., Shaburova, N. A. & Trofimov, E. On the application of NbTaTiVW refractory high entropy alloy particles in the manufacturing process of WC based matrix body drill bits. International Journal of Refractory Metals and Hard Materials 99 (2021), doi: 10.1016/j.ijrmhm.2021.105608